Scania CN113

Hi, ich habe eben diesem Scania Gelenkbus gefunden, allerdings sieht er bei mir so aus, vielleicht könnte mir da ja jemand von euch helfen
http://www.ct-verkehr.de/Bilderupload/bi...ervbusRIIXI.jpg
danke mfg peter

das liegt wahrscheinlich daran, dass die teile von dem bus mit zeichen benannt sind, die ein deutscher computer nicht erkennen/lesen kann.

Hi. Scania on screen is my model and works only on polish vbus.
I can't help sory

You have to edit the model and texture. Remove from the Polish characters

Yes i have the same problem if someone manage to edit it for english computer can you please upload english version

Meanwhile if you like Scania 113 try this bus is not articulated:
http://img508.imageshack.us/img508/2444/sc113xl6.png

you can find it here (have to register first ):
http://www.symulator.fora.pl/autobusy,3/download,9.html

There you can find Scania cn 112 also
(I have repaints of this one in many colors)

check on this:
>>|DOWNLOAD|<<

Original von Dominik335 Hi. Scania on screen is my model and works only on polish vbus. I can't help sory

It is a fantastic bus you should make Scania CN 112 and Scania 111 too
you are very good at making Scania buses thanks

kych0 check on this: >>|DOWNLOAD|<<

Thank you so much now this fantastic bus work
I have already made many repaint version in Red and Turqoise/white color etc...

Question:
Are anyone having a problem with this bus only can take 22 Passanger max?
anyway to increase that?

Another way would be, to start vBus over Polish Text...you could try. on my PC it works like this.

Originally posted by J.LQuestion: Are anyone having a problem with this bus only can take 22 Passanger max? anyway to increase that?

Yes.

1. Open your vBus install folder
   
2. then open the 'model' folder
   
3. select the folder with the name of the bus you wish to modify
   
4. find the file called desc.bs1
   
5. open the file in notepad
   
6. find the line starting with CZ
   
7. the number after CZ is most likely 22 in your file

   code: 1: CZ 22

   
   
8. Just change the 22 to the passenger capacity you want, i.e. 92, which will make your CZ line look like this:

   code: 1: CZ 92

   
   
9. save the desc.bs1 file, exit notepad, and try the bus
   

Thanks I will try that.

Another question in Articulated buses the passanger usualy only aperar in the first half of the bus while the second half always is empty

Is there someway to change that so that passanger fill the whole articulated bus
I am not sure yet if this happen on all articulated bus models have to try it out but i think it does.

Anyone know how many passanger a Articulated Scania Cn113 can take?

Nice bus I make it to english version vbus